White Hygienic Wall Cladding in Birmingham

Whether you’re refurbishing a commercial kitchen, fitting out a healthcare facility or upgrading a school canteen, white hygienic PVC wall cladding is one of the most practical surface choices available. It’s robust, easy to maintain and well suited to environments where hygiene and durability matter.

Apple Solutions has been supplying and installing hygienic wall cladding for commercial clients across Birmingham and the West Midlands since 2005. We work with PVC cladding systems from established manufacturers and handle the full installation — from initial site assessment through to finished walls.

The products we install

We work with three manufacturers whose products we know well and can install to a high standard.

BioClad Advanced PVC Hygienic White

A 2.5 mm semi-rigid PVCu sheet, UK manufactured, in white satin finish.

Available sheet sizes: 1220 × 2500 mm, 1220 × 2800 mm and 1220 × 3050 mm. Approximate weight: 3.5 kg/m².

The system is designed for hot-welded joints, thermoformed corners and matching trims.

Fire performance: BioClad Advanced carries a BS 476 Part 7 Class 1 surface spread of flame classification. A BS 476 Part 6 Class 0 fire propagation classification has been independently tested on a composite of 2.5 mm BioClad panel bonded with BioClad polyurethane adhesive to 12 mm Gyproc plasterboard. A European B-s3,d0 classification is also listed in the manufacturer’s specification. These classifications are specific to the tested system and substrate conditions — other combinations may not achieve the same results.

AM-Clad Hygienic 2.5 mm PVC

A 2.5 mm semi-rigid extruded UPVC panel with a smooth satin finish. Available in white and a range of other colours; gloss finish available on request, subject to minimum order quantities.

Standard width: 1220 mm. Sheet heights: 2438 mm, 2744 mm and 3048 mm. Density: 1.4 g/cm³; approximate weight: 3.5 kg/m².

Fire performance: AM-Clad Hygienic achieves EN 13501-1 Euroclass B-s3,d0, independently tested by Shirley Technologies Limited.

Trovex Diamond

A professional-grade PVC wall cladding system, available in Diamond White and a range of other finishes, supplied with matching trims and accessories. Colours, trims and specifications can be discussed as part of your project requirements.

Completed hygienic wall cladding installation in a commercial canteen, showing white PVC panels on walls
Four Seasons Health Care washroom after refurbishment

How we install it

We use two installation methods, and we’ll advise which is right for your project after assessing the site.

Thermoformed (welded) installation

Corners are moulded and joints are welded using rubber weld rods, producing smooth, continuous transitions at internal and external corners.

Jointing-strip installation

Corners and joints are finished with matching trims. A practical, well-proven finish for a wide range of commercial environments.

Our team will assess the site and advise on the most suitable method before work begins.

Where hygienic wall cladding is used

We regularly install white hygienic cladding in:

  • Commercial kitchens and food preparation areas
  • Healthcare facilities, GP surgeries and care home kitchens
  • Schools, colleges and canteen facilities
  • Laboratories and cleanrooms
  • Commercial washrooms and changing facilities
  • Cold stores and refrigerated areas

Our hygienic wall cladding installations focus on commercial and healthcare environments across Birmingham and the West Midlands. We don’t take on domestic decorating work.

Trovex hygienic wall cladding fitted throughout a Leonard Cheshire care home commercial kitchen in Wolverhampton

Get in touch

Planning a commercial kitchen, healthcare, education or care refurbishment? We install white hygienic PVC wall cladding across Birmingham and the West Midlands, using AM Clad, Trovex and BioClad systems. We’ll survey your premises, advise on the right system and installation method for the job, and provide a clear, detailed written quotation.

FAQs

There is no single product you are legally required to use, but food hygiene law requires the walls of food rooms to be kept in good condition and be easy to clean. Council food-premises guidance lists PVC and proprietary sheeting among accepted wall finishes. Your local environmental health officer has the final say, and hygienic cladding makes it straightforward to meet their expectations.

No wall finish is truly fireproof. Hygienic cladding is tested for how it reacts to fire, and the result depends on the product and the system it was tested in, including the panel, adhesive and backing wall. We specify the right system for your premises and can supply the manufacturer’s data sheets so you can check the fire performance for your project.

There is no grout to trap dirt and mould, and far fewer joints to clean. Thermoformed (welded) corners give a smooth, continuous surface, and installation is usually quicker than tiling, which means less disruption to your premises.

We install it in commercial kitchens and food preparation areas, healthcare facilities, schools and canteens, laboratories and cleanrooms, commercial washrooms and cold stores across Birmingham and the West Midlands. Our hygienic cladding work is commercial only. We do not install it in domestic homes.

Wipe it down with a cloth and warm soapy water. If you use stronger cleaning chemicals or disinfectants, check them against the manufacturer’s guidance first, and avoid abrasive pads that could scratch the surface.

With thermoformed installation, corners are moulded and joints are welded to create one continuous, sealed surface. Trimmed installation uses matching trims at the joints and corners. We will recommend the right method once we have assessed the site and how it is used.

We install AM Clad, Trovex and BioClad systems. We recommend the best fit for your environment, the performance you need and your budget.

We visit your premises, assess the walls and the way the space is used, advise on the right cladding system and installation method, and then send you a clear, detailed written quotation.

Apple Solutions has been trading since 2005 and brings extensive building and refurbishment experience to commercial projects. We work with clients to assess their requirements, recommend a suitable hygienic wall cladding system and provide a professional installation.

When correctly specified, installed and maintained in accordance with the manufacturer’s guidance, hygienic wall cladding can provide a durable, long-lasting wall finish. Its lifespan will depend on the product selected, the environment and how the surface is maintained.